Boiler feed water pump is suitable for conveying clean […]
Boiler feed water pump is suitable for conveying clean water with temperature below 110 °C or other non-corrosive liquid with physical and chemical properties similar to water. It is widely used in boiler feed water and urban living water supply for industrial and mining enterprises. DG series pumps are especially suitable for boiler feed water, and can also be widely used in pressure vessel water supply, hot water circulation, high-rise building water supply, farmland irrigation, fire boosting, water washing, food, brewing, medicine, chemical, aquaculture, environmental protection. And other industries.
The basic classification of rubber joints: divided into general, special, and heat-resistant according to the performance.
General class: Suitable for conveying water with a temperature of -15 ° C ~ 80 ° C, acid solution or alkali solution with a concentration below 10%.
Special types: Suitable for special performance requirements such as oil resistance, plug resistance, ozone resistance, abrasion resistance or chemical resistance.
Heat resistant: Suitable for conveying water with a temperature higher than 80 °C.
According to the structure, it is divided into single sphere, double sphere, triple sphere, elbow sphere, wind pressure coil body and so on. Each form can be divided into three categories: concentric equal diameter, concentric diameter, and eccentricity.
Divided into shapes by:Concentric, concentric, and eccentric.
According to the connection form of the product and the pipeline, it can be divided into flange connection, screw connection and clamp connection, threaded pipe flange connection and the like.
According to the work pressure:Six grades of 0.6 MPa, 1.0 MPa, 1.6 MPa, 2.5 MPa, and 6.4 MPa.